Attachments - optional equipment
Road sweeping machine 95
Attachments - optional
equipment
Road sweeping machine
– When using the equipment on public roads, make sure that the
type approval for the attachment of a road sweeping machine
has been entered into the vehicle registration and that you have
a special approval from the registration office.
– The road sweeping machine is most suitable for sweeping
paved surfaces, but not for hazardous substances and
health threatening dusts.
– Connect the hydraulic hoses correctly so that the hoses are
free and not squashed when taking the road sweeper into oper-
ation.
– For road sweeping machines with water spraying device plug
theelectricplugforthewaterpumpintothesocketonthefront
frame.
– During operation make sure that the height adjustable support-
ing wheels are adjusted to such a height, that the horizontally
adjusted broom drum only just touches the ground. The weight
of the road sweeping machine must always rest on the support-
ing wheels and not on the brushes. If the brushes are adjusted
too low the broom bristles will brake and the steering rollers will
vibrate.
– All guards and safety devices must always be in place. During
work the resting supports must be in raised position.
– The working speed should be 4-8 km/h / 2.5-5 mph (select
speed range gear stage "1").
Maintenance
– Grease all lubrication points on the road sweeping machine
after approx. 30 operating hours.
– The condition of hydraulic oil lines must be examined at least
once every year.
To Next Page
Loading...
