69
VS003/VS014/VS015; or
• Up to 4 handsets, no VS013, and as many VS001/
VS002/VS003/VS014/VS015 as you like (max. 30); or
• Up to 3 handsets, 1 VS013, and as many VS001/
VS002/VS003/VS014/VS015 as you like (max. 30).
ADD A NEW SENSOR/DEVICE
After you have purchased a new Contact Sensor (VS001),
Motion Sensor (VS002), Garage Sensor (VS003), Audio
Doorbell (VS013), Extension Ringer (VS014), or SOS
pendant (VS015), you need to register each of them to
your telephone system before use.
1. Press and hold the pair button in the front of the
base station for about ve seconds, the base
station is entered into registration mode.
2. To enter the registration mode on your device,
following the respective instructions below:
• Press and hold the pair button on the Contact
Sensor (VS001);
• Press and hold the PAIRING button, using a
narrow-pointed object, on the Motion Sensor (VS002);
• Press and hold the P button on the Contact
Sensor (VS003) for 10 seconds.
• Press and hold the pair button on the Audio
Doorbell (VS013);
• Press and hold the nger button on the Extension
Ringer (VS014) for 10 seconds;
• Press and hold the CANCEL button on the SOS
pendant (VS015) for 10 seconds.
To Next Page
Loading...
Need help?
General
