6
2.3 Baby unit installation
Install the baby unit as shown below.
Make sure that the power outlet is not controlled by a wall switch. Bundle
the power cord neatly with the self-adhesive strap.
Notes
The baby unit power adapters are intended to be correctly oriented in a vertical
or oor mount position. The prongs are not designed to hold the plug in place if
it is plugged into a ceiling, under-the-table or cabinet outlet.
Make sure the baby units and the power adapter cords are out of reach of
children.
•
•
Baby unit
Power outlet not
controlled by a wall
switch
Baby unit power
adapter
Self-adhesive strap
Raise the antenna for better
reception.
To Next Page
Loading...
