VTech BM3000 - Using Your Baby Monitor; Parent Unit Settings

24
4.1 Parent unit settings
To enter the parent unit menu:
Press M when the parent unit is not in use.
Press or until the desired feature is highlighted on the left side.
Press M or to enter that feature menu.
Press or until the desired feature or option is highlighted on the
right side. Press M or to enter that feature menu, or press
M to conrm your selection. You hear a conrmation tone.
Note
To return to the previous menu, press /BACK.
4.2 Alert tone
4.2.1 Low battery tone alert
You can set whether the parent unit beeps whenever the
parent unit or the baby unit operates in low battery condition.
The low battery tone alert is preset to On.
To set the low battery tone alert:
Press M when the parent unit is not in use.
Press or to choose ALERT TONE, then press M or .
Press M or again to choose Low Battery Tone.
Press or to choose On or Off, then press M to conrm your
selection. You hear a conrmation tone.
Note
The low battery tone alert of the baby unit only works while viewing that particular
baby unit in single-CAM mode or in multi-CAM mode.
4.2.2 No link alert
You can set whether the parent unit beeps whenever the link between
the parent unit and the baby unit is lost. The no link alert is
preset to On.
To set the no link alert of the parent unit:
Press M when the parent unit is not in use.
1.
2.
3.
1.
2.
3.
4.
1.
4. USING YOUR BABY MONITOR