34
6.4 View
You can change the screen to view images from
different baby units, or you can turn off the screen.
To view different baby units:
Press to scroll to the desired baby units. They
are shown in chronological order: CAM 1, CAM 2,
CAM 3, CAM 4 and multi-CAM.
Note
When there is only one paired baby unit, multi-CAM mode is not available.
6.5 To turn the screen on or off
Press and hold for 2 seconds to turn off the screen.
When the screen is turned off, press any key to turn it on.
6.6 Talk to the baby unit
You can broadcast messages from the parent unit to any one of the baby
units.
To talk to the baby unit:
Press to choose a desired baby unit.
Press and hold TALK when the parent unit is in single-CAM mode.
Speak towards the MIC (microphone) on the parent unit. The TALK
light is on when the voice connection to the baby unit is made. Your
voice is broadcast to the baby unit.
Notes
The TALK feature does not work in multi-CAM mode.
If the speaker volume of the parent unit is set to OFF, it will be reset to the default
volume after you press and hold TALK.
Lullaby playback is paused when the parent unit is talking the baby unit. Lullaby
playback resumes when the parent unit nishes using the TALK feature.
•
•
1.
2.
•
•
•
To Next Page
Loading...
