27
USING YOUR BABY MONITOR
4.4.4 Temperature format
You can set the temperature scale of the baby unit. The temperature
scale is preset to Fahrenheit.
To change the temperature scale:
Press M when the parent unit is not in use.
Press or to choose TEMPERATURE, then press M or .
Press or to choose Format, then press M or .
Press or to choose Fahrenheit or Celsius, then press M to
conrm your selection. You hear a conrmation tone.
4.5 Vibration
You can set the parent unit to vibrate once whenever there is any sound
detected from the baby units. The vibration mode will only be enabled
again after 20 seconds of silence. The vibration setting is preset to
On if speaker is off.
To change the vibration setting:
Press M when the parent unit is not in use.
Press or to choose VIBRATION, then press M or .
Press or to choose On if speaker is off, Always on or Off.
On if speaker is off - The parent unit vibrates once whenever the
baby units detect sounds after 20 seconds of silence while the
speaker of the parent unit is turned off.
Always on - The parent unit vibrates once whenever the baby
units detect sounds after 20 seconds of silence.
Off - The parent unit will not vibrate even if the baby units detect
sounds.
Press M to conrm your selection. You hear a conrmation tone.
Notes
If you set the sensitivity level to Level 5 (Maximum) (see page 25), the baby
unit will be very sensitive and detect any sounds including background noises.
These background noises may disrupt the silence and prevent the vibration
feature to work properly.
If you set the vibration setting to On if speaker off or Always on, the parent
unit will vibrate once when you turn the speaker off.
1.
2.
3.
4.
1.
2.
3.
•
•
•
4.
•
•
To Next Page
Loading...
Need help?
General
