VTech BM3000 User Manual

10
If you drill the holes into a stud, go to step 3.
-OR-
If you drill the holes into an object other than a stud, insert the wall
anchors into the holes and tap gently on the ends with a hammer until
the wall anchors are ush with the wall.
Insert the screws into the holes and tighten the screws until only 0.7
cm of the screws are exposed.
2.
3.

VTech BM3000 Specifications

General

Brand	VTech
Model	BM3000
Category	Baby Monitor
Language	English