7
2 Align the holes on the bracket with
the standard wall plate and slide the
bracket down until it clicks securely in
place.
Install and charge the battery
Install the battery as shown below.
Use only supplied battery.
If the handset will not be used for a long
time, disconnect and remove the battery to
prevent possible leakage.
•
•
Connect the power adapter to the
telephone base and an electrical
outlet not controlled by a wall switch.
4.
3. Align the grooves on the telephone
base with the tabs on the wall mount
bracket, and then slide it down until it
clicks securely in place.
To Next Page
Loading...
Need help?
Frequencies and Channels
Memory
