VTech DS6621 User Manual

34
Delete your announcement
Press MENU when the phone is not
in use.
Press or to scroll to Answering
sys, and then press SELECT.
Press SELECT again to choose
Announcement.
The handset displays Play [2]
Del [3] Rec [7] and it announces,
“Announcement, press play or
press record.” Press 3 to delete
your recorded announcement. The
handset displays Annc deleted
and then the system announces,
“Announcement deleted.” You hear a
confirmation tone.
NOTE
When your announcement is deleted, calls
are answered with the preset announcement.
Set number of rings
You can set the answering system to
answer an incoming call after 2, 3, 4, 5
or 6 rings; or toll saver. If you choose toll
saver, the answering system answers
a call after 2 rings when you have new
messages, or after 4 rings when you
have no new messages.
Press MENU when the phone is not
in use.
Press or to scroll to Answering
sys, and then press SELECT.
Press or to scroll to Ans sys
setup, and then press SELECT.
Press or to scroll to # of rings,
and then press SELECT.
Press or to choose 2, 3, 4,
5, 6 or Toll saver, and then press
SELECT.
1.
2.
3.
4.
1.
2.
3.
4.
5.
Turn the call screening on
or off
Use this feature to choose whether
incoming messages can be heard while
they are being recorded.
Press MENU when the phone is not
in use.
Press or to scroll to Answering
sys, and then press SELECT.
Press or to scroll to Ans sys
setup.
Press SELECT to choose Call
screening.
Press or to choose On or Off.
Press SELECT to save and you hear
a confirmation tone.
Turn the message alert tone on
or off
When the message alert tone is set to
on, and there is at least one new
message, the telephone base beeps
every 10 seconds. The message alert
tone is preset to off.
Press MENU when the phone is not
in use.
Scroll to Answering sys then press
SELECT.
Scroll to Ans sys setup then press
SELECT.
Scroll to Msg alert tone then press
SELECT.
Press or to choose On or Off.
Press SELECT to save and you hear
a confirmation tone.
NOTES
The answering system must be turned on
for the message alert tone to be functional.
Press any key on the telephone base
(except /FIND HANDSET) to temporarily
silence the message alert tone.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
•
•

VTech DS6621 Specifications

Frequencies and Channels

DECT frequency	1921.536-1928.448 MHz
Bluetooth frequency	2402.000-2480.000 MHz
DECT channels	5
Bluetooth channels	79

Power Requirements

handset battery voltage	2.4 V
charger voltage	6 V
charger current	300 mA

Memory

phonebook memory locations	1000
phonebook digits capacity	30 digits
phonebook characters capacity	15 characters
caller ID log memory locations	50
caller ID log digits capacity	24 digits
caller ID log characters capacity	15 characters