20
Answer a home call while on a
cell call
While you are on a cell call and you
receive an incoming home call, you
hear a beep, and your handset flashes
. The telephone base and all other
handsets ring.
To answer the incoming home call:
Press /HOME on the handset. The
cell line is put on hold.
To resume the cell call on hold:
Press /CELL on the handset.
Speakerphone
When the handset is on a call, press
to switch between the speakerphone
and the handset earpiece. When the
speakerphone is active, the handset
displays Speaker.
Volume
During a call, press VOLUME/ or
VOLUME/ .
If this is a cell call and the volume is too
loud or quiet, try changing the volume
on your cell phone. On some cell
phones, changing the volume on the
cell phone affects your cell call volume
on the DS6621 handset.
The handset and speakerphone volume
settings are independent.
When the volume reaches the minimum
or maximum setting, you hear two beeps.
Mute
The mute function allows you to hear
the other party but the other party
cannot hear you.
During a call, press MUTE. The
handset displays Muted until the
mute function is turned off.
•
•
•
Press MUTE again to resume the
conversation. The handset briefly
displays Microphone on.
Join a call in progress (for
multiple handset models only)
Another handset can join you on a
home call. That call continues until
all parties hang up. You can share an
outside call with up to two handsets at
the same time.
You can buy additional expansion
handsets (DS6600) for this telephone
base. You can register up to five devices
to the telephone base.
To join a call::
When a handset is already on a
call, press /HOME or on another
handset to join the call.
Press OFF or place the handset
in the telephone base or handset
charger to exit the call. The call
continues on the other handset until
both handsets hang up.
If you have paired a DECT 6.0 cordless
headset and speakerphone to the telephone
base, you can also join a call in progress
using the paired device. Refer to the user’s
manuals of the respective product for more
information.
Call waiting on the home line
When you subscribe to call waiting
service with your telephone service
provider, the handset flashes and you
hear a beep if someone calls while you
are already on a call.
Press FLASH on the handset to put
your current call on hold and take the
new call.
Press FLASH on the handset at any
time to switch back and forth
between calls.
•
•
•
•
•
To Next Page
Loading...
Need help?
Frequencies and Channels
Memory
