VTech DS6621 User Manual

22
Intercom
Use the intercom feature for
conversations between two devices.
To initiate an intercom call:
Press MENU when the handset is not
in use.
Press or to highlight Intercom,
and then press SELECT.
Your handset shows Intercom to:
Use the dialing keys to enter a deviceenter a device
number (1-5).
The handset shows Calling HS X.
The destination handset rings and
shows HS X is calling.
To answer the intercom call on the
destination handset, press /HOME,
/CELL, , or any dialing key (0-9,
, or ). Both handsets now
show Intercom.
To end the intercom call on either
handset, one party presses OFF
or places the handset back in the
telephone base or handset charger.
Both handsets display Intercom ended.
NOTES
If you have paired a DECT 6.0 cordless
headset or speakerphone to the telephone
base, you can also intercom to these
devices by entering a number (assigned
according to registration order) in step 3.
To answer the intercom call on a DECT 6.0
cordless headset or speakerphone, refer
to the user’s manuals of the respective
product.
You can cancel the intercom call before it
is answered by pressing OFF.
If the destination handset does not
answer the intercom call within 100
seconds, or if it is out of range, on a call,
or accessing the phonebook or caller ID
log, your handset displays Unable to call
and then returns to idle mode.
You can press OFF or MUTE on the
destination handset to temporarily silence
the intercom ringer.
Only one intercom call can be established
at a time.
1.
2.
3.
4.
5.
•
•
•
•
•
•
Transfer a call
While on an outside call, you can use
the intercom feature to transfer the call
from one handset to another.
To transfer a call:
Press MENU when the handset is not
in use.
Press or to highlight Intercom,
and then press SELECT.
Your handset shows Intercom
to: Use the dialing keys to enter aenter a
handset number (1-5).
Your handset shows Calling HS X.
The destination handset rings and
shows HS X is calling.
To answer the intercom call on the
destination handset, press /HOME,
/CELL, , or any dialing key (0-9,
, or ). Both handsets now
show Intercom.
To transfer the call, press OFF on the
initiating handset or place the initiating
handset back in the telephone base or
charger.
To end the call, press OFF on the
destination handset or place the
destination handset back in the
telephone base or charger.
NOTES
If you have paired a DECT 6.0 cordless
headset or speakerphone to the telephone
base, you can also transfer the call to these
devices. Refer to the user’s manuals of
respective product for more information.
You can cancel the intercom call before it
is answered by pressing OFF.
If the destination handset does not
answer the intercom call within 100
seconds, or if it is out of range, on a call,
or accessing the phonebook or caller ID
log, your handset displays Unable to call
and then returns to idle mode.
You can press OFF or MUTE on the
destination handset to temporarily
silence the intercom ringer.
Only one intercom call can be established
at a time.
1.
2.
3.
4.
5.
6.
•
•
•
•
•

VTech DS6621 Specifications

Frequencies and Channels

DECT frequency	1921.536-1928.448 MHz
Bluetooth frequency	2402.000-2480.000 MHz
DECT channels	5
Bluetooth channels	79

Power Requirements

handset battery voltage	2.4 V
charger voltage	6 V
charger current	300 mA

Memory

phonebook memory locations	1000
phonebook digits capacity	30 digits
phonebook characters capacity	15 characters
caller ID log memory locations	50
caller ID log digits capacity	24 digits
caller ID log characters capacity	15 characters