VTech DS6621 User Manual

31
Sound settings
Key tone
You can turn the key tone on or off for
each handset. If you turn the key tone
off, there are no beeps when you press
the handset keys.
Press MENU when the handset is not
in use.
Press or to highlight Settings,
and then press SELECT.
Press or to highlight Key tone,
and then press SELECT.
Press or to highlight On or Off.
Press SELECT to save your
selection. Then the handset returns
to the previous menu. You hear a
confirmation tone.
Ringer tone
You can choose from different ringer
tones for each handset.
Press MENU when the handset is not
in use.
Press or to highlight Ringers,
and then press SELECT.
Press or to highlight Home
ringtone or Cell ringtone, and then
press SELECT.
Press or to sample each ringer
tone.
Press SELECT to save your
selection. Then the handset returns
to the previous menu. You hear a
confirmation tone.
NOTE
If you turn off the ringer volume, you will not
hear ringer tone samples.
Handset ringer volume
You can set the ringer volume or turn the
ringer off on each handset. When the
ringer is off, appears on the screen.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Press MENU when the handset is not
in use.
Press or to highlight Ringers,
and then press SELECT.
Press or to select Home
volume or Cell volume, and then
press SELECT.
Press or to sample each volume
level.
Press SELECT to save your
selection. Then the handset returns
to the previous menu. You hear a
confirmation tone.
NOTE
The ringer volume also determines the
ringer volume for intercom calls. If the ringer
volume is set to off, that handset is silenced
for all incoming calls except paging tone.
Telephone base ringer volume
Press – /VOL/ + on the side of telephone
base to adjust the ringer volume when the
telephone base is not in use.
When you set the ringer volume to zero,
the base ringer is off and the system
announces, “Base ringer is off.”
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer of the
handset without disconnecting the call.
The next call rings normally at the preset
volume.
To silence the handset ringer:
Press OFF or MUTE on the handset
and it displays Ringer muted and .
NOTES
Each handset and the base ring when
there is an incoming call unless the ringer
volume of that device is turned off.
You can also press or on the base unit
to adjust the ringer volume. The adjustment
will be saved and applied to the next
incoming call.
1.
2.
3.
4.
5.
•
•
•

VTech DS6621 Specifications

Frequencies and Channels

DECT frequency	1921.536-1928.448 MHz
Bluetooth frequency	2402.000-2480.000 MHz
DECT channels	5
Bluetooth channels	79

Power Requirements

handset battery voltage	2.4 V
charger voltage	6 V
charger current	300 mA

Memory

phonebook memory locations	1000
phonebook digits capacity	30 digits
phonebook characters capacity	15 characters
caller ID log memory locations	50
caller ID log digits capacity	24 digits
caller ID log characters capacity	15 characters