VTech DS6621 User Manual

19
Make a cell call
Press /CELL on the handset. The
handset displays Select a device.
If you have only one cell phone
connected to the telephone base,
press SELECT to select the only
device.
If you have two cell phones
connected to the telephone base,
press or to select a cell
phone and then press SELECT.
Enter the telephone number, and
then press /CELL to dial.
The handset displays Unable to
call if your cell phone is in use.
NOTES
The handset shows the elapsed time as
you talk (in hours, minutes and seconds).
While entering numbers, press DELETE
or CANCEL to make corrections;
press and hold PAUSE to insert a dialing
pause (a p appears).
While using the cell line, place your cell
phone closer to the telephone base, and
make sure that there are no physical
obstacles such as large furniture or thick
walls between the telephone base and the
cell phone.
Predial a cell call
Enter the telephone number.
Press /CELL to dial.
If you have only one cell phone
connected to the telephone base,
it is automatically selected to
make cell calls.
If you have two cell phones
connected to the telephone base,
the handset displays Select a
device. Press or to select a
cell phone and then
press SELECT.
1.
•
•
2.
•
•
•
•
1.
2.
•
•
NOTES
The handset displays Unable to call if
your cell phone is in use.
The handset shows the elapsed time as
you talk (in hours, minutes and seconds).
While entering numbers, press DELETE
or CANCEL to make corrections;
press and hold PAUSE to insert a dialing
pause (a p appears).
Press /CELL, /HOME, , or any
dialing key (0-9, or ) to answer.
NOTE
You can also use your cell phone to answer
the call. If you answer with your cell phone, it
will disconnect from the telephone base.
End a cell call
Press OFF on the handset, place the
handset in the telephone base or
handset charger.
Answer a cell call while on a
home call
While you are on a home call and you
receive an incoming cell call, you hear
a beep, and your handset flashes .
The telephone base and all other
handsets ring.
To answer the incoming cell call:
Press /CELL on the handset. The
home line is put on hold.
To resume the home call on hold:
Press /HOME on the handset.
•
•
•

VTech DS6621 Specifications

Frequencies and Channels

DECT frequency	1921.536-1928.448 MHz
Bluetooth frequency	2402.000-2480.000 MHz
DECT channels	5
Bluetooth channels	79

Power Requirements

handset battery voltage	2.4 V
charger voltage	6 V
charger current	300 mA

Memory

phonebook memory locations	1000
phonebook digits capacity	30 digits
phonebook characters capacity	15 characters
caller ID log memory locations	50
caller ID log digits capacity	24 digits
caller ID log characters capacity	15 characters