VTech DS6621 User Manual

43
Pair cell
first
You need to pair a cell
phone before making a
cell call.
Phone
The handset is on a
home call.
Put in
charger
The battery is very low.
The handset should be
charged.
Rec mem full
The system recording
time is full.
Rec mem low
The answering system
has only three minutes
of recording time left.
Registering...
The handset is
registering to the
telephone base.
Failed
The handset registration
is not successful.
Ringer off
The ringer is off
temporarily during an
incoming call.
Saved
The entry is saved in
the phonebook.
Speaker
The handset
speakerphone is in use.
To register
HS...
...see manual
Screen display on a
non-registered handset.
Transfer to:
You have started
transferring an outside
call, and need to enter
the desired handset
number.
Unable to
call
The handset is out of
range while on a call.
Failed phone call (the
telephone line is in use).
Failed intercom call
(there are already two
handsets being used).
XX missed
calls
There are new calls in
the caller ID log.
XX new
messages
There are new
messages in the
answering system.
ECO mode
This power conserving technology
reduces power consumption for optimal
battery performance. The ECO mode
activates automatically whenever
the handset is synchronized with the
telephone base.
The handset shows ECO when the
ECO mode activates.

VTech DS6621 Specifications

Frequencies and Channels

DECT frequency	1921.536-1928.448 MHz
Bluetooth frequency	2402.000-2480.000 MHz
DECT channels	5
Bluetooth channels	79

Power Requirements

handset battery voltage	2.4 V
charger voltage	6 V
charger current	300 mA

Memory

phonebook memory locations	1000
phonebook digits capacity	30 digits
phonebook characters capacity	15 characters
caller ID log memory locations	50
caller ID log digits capacity	24 digits
caller ID log characters capacity	15 characters