VTech DS6621 User Manual

14
Auto connection
A cell device may be disconnected from
the telephone base when:
The Bluetooth feature of your
connected cell device is turned off.
The power of your cell device is
turned off.
Your cell phone is not within range of
the telephone base.
When the Bluetooth feature or power on
the cell device is turned on, or it moves
within range of the base, the base will
try to reconnect to the cell device. If you
disconnect the cell device from the cell
devices list, the base will not attempt
to reconnect unless your cell device is
moved out of range and back in range
again.
Connect a paired cell phone or
headset
If you need to connect your paired cell
phone or headset to the telephone
base manually:
Press CELL 1 and/or
CELL 2/HEADSET on the
telephone base when it is not in
use. The CELL 1 and/or
CELL 2/HEADSET light flashes.
When the cell phone or headset is
connected to the telephone base, you
hear two beeps. The corresponding
status icon (
1
/
2
) displays.
The corresponding device light
( CELL 1 and/or
CELL 2/HEADSET ) turns on.
•
•
•
1.
2.
Disconnect a paired cell phone
or headset
If you need to disconnect a paired cell
phone or headset from the telephone
base, refer to the user’s manuals of your
cell phone or headset for instructions to
disconnect a Bluetooth device.
If you press and hold CELL 1 and/or
CELL 2/HEADSET on the telephone
base, the existing paired cell phone
in that slot will be erased. See Add a
Bluetooth enabled cell phone and
Add a Bluetooth enabled headset
on how to pair and connect a new cell
phone or headset.
Review the cell devices list
Press MENU on the handset when it
is not in use.
Press or to highlight Bluetooth,
and then press SELECT.
Press or to highlight Device list,
and then press SELECT.
Download phonebook
You can download phonebook entries
to your DS6621 telephone system via
Bluetooth wireless technology. Each
downloaded phonebook are stored in
the handset phonebook with up to
24 digits for each phone number and
15 characters for each name.
Before downloading the phonebook,
make sure the cell phone is paired and
connected to the DS6621. Make sure the
handset battery is charged for at least
10 minutes.
Place your cell phone next to the
telephone base while downloading.
1.
2.
3.

VTech DS6621 Specifications

Frequencies and Channels

DECT frequency	1921.536-1928.448 MHz
Bluetooth frequency	2402.000-2480.000 MHz
DECT channels	5
Bluetooth channels	79

Power Requirements

handset battery voltage	2.4 V
charger voltage	6 V
charger current	300 mA

Memory

phonebook memory locations	1000
phonebook digits capacity	30 digits
phonebook characters capacity	15 characters
caller ID log memory locations	50
caller ID log digits capacity	24 digits
caller ID log characters capacity	15 characters