EasyManuals Logo

VTech DS6621 User Manual

VTech DS6621
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
33
Set your built-in answering
system
The answering system can record
and store up to 99 messages. Each
message can be up to three minutes in
length. The total storage capacity for the
announcement, messages and memos
is approximately 23 minutes. The actual
recording time depends on individual
message characteristics.
Your answering system allows you to set
your announcement, to save and delete
messages, activate call screening, to
set number of rings before pick up, to
access remotely, and to control the
recording time.
Turn the answering system on
or off
The answering system must be turned
on to answer and record messages.
When the answering system is turned
on, the /ANS ON/OFF light on the
telephone base turns on and ANS ON
displays on the handset.To turn on or
off with the telephone base:
Press /ANS ON/OFF to turn the
built-in answering system on or
off. When the answering system is
turned on, it announces, “Calls will
be answered.” When the answering
system is turned off, it announces,
Calls will not be answered.
To turn on or off with the handset:
Press MENU when the phone is not
in use.
Press or to highlight Answering
sys, and then press SELECT.
Press or to highlight Answer
on/off, and then press SELECT.
Press or to highlight On or Off,
and then press SELECT to save. You
hear a confirmation tone.
1.
2.
3.
4.
Default announcement
The telephone is preset with a greeting
that answers calls with “Hello, please
leave a message after the tone.” You
can use this preset announcement, or
replace it with your own.
Record your own
announcement
The announcement can be up to 90
seconds in length.
Press MENU when the phone is not
in use.
Press or to scroll to Answering
sys, and then press SELECT.
Press SELECT again to choose
Announcement.
The handset displays Play [2]
Del [3] Rec [7] and it announces,
Announcement, press play or press
record.
Press 7 to record. The
handset announces, Record after
the tone. Press STOP when you are
done. After the tone, speak towards
the handset microphone. Press 5
when done.
Play your announcement
Press MENU when the phone is not
in use.
Press or to scroll to Answering
sys, and then press SELECT.
Press SELECT again to choose
Announcement.
The handset displays Play [2]
Del [3] Rec [7] and it announces,
Announcement, press play or press
record.
Press 2 to play the current
announcement.
1.
2.
3.
4.
1.
2.
3.
4.

Table of Contents

Other manuals for VTech DS6621

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VTech DS6621 and is the answer not in the manual?

VTech DS6621 Specifications

Frequencies and Channels IconFrequencies and Channels
DECT frequency1921.536-1928.448 MHz
Bluetooth frequency2402.000-2480.000 MHz
DECT channels5
Bluetooth channels79
Power Requirements IconPower Requirements
handset battery voltage2.4 V
charger voltage6 V
charger current300 mA
Memory IconMemory
phonebook memory locations1000
phonebook digits capacity30 digits
phonebook characters capacity15 characters
caller ID log memory locations50
caller ID log digits capacity24 digits
caller ID log characters capacity15 characters

Related product manuals