Mount the Contact Sensor
We recommend you mount the magnet unit on a door, window, drawer, cupboard
or jewelry box, and mount the sensor unit on its respective frame.
You can use the spacers provided if there is a difference in level between the door
and the frame. The spacer will help to align your sensor to the correct height. You
can also use a spacer if the frame is too narrow or has some decorative molding.
You can mount the sensor unit with mounting tape first, and then use screws later if you
decide to mount it at that location for long term.
Make sure the mounting surface is clean. A textured surface or any imperfections to a
smooth surface can keep the mounting tape from making a strong bond.
Align the magnet unit with sensor unit when mounting.
The distance between the sensor unit and magnet unit must be less than 1 cm
(0.4 inch).
•
•
•
•
To Next Page
Loading...
Need help?
General
