VWR P4 - Page 24

20
Method Set the measurement parameters.
Zero Scan baseline.
Read Scan the sample and draw curve.
Stop Stop scanning.
List View the result(s) list.
2. Press the icon to setup the measurement parameters.
Start wavelength
Scan start wavelength
End wavelength
Scan end wavelength
Step
Scan interval: 0.1,0.2, 0.5, 1.0,2.0, 5.0,10.0 nm
Speed
HS: High speed
MS: Medium speed
LS: Low speed
Photometry mode
Abs: absorbance
%T: transmissivity
Y minimum
Minimum ordinate