VWR P4 - Spectrum

19
3.3 Press the button Open to load measurement method stored in the internal memory/USB disk.
3.4 Press the button Measure to accept the new measurement method and back to measurement
interface.
3.5 Put the reference in the measurement channel, press the icon to do zero.
3.6 Put the sample in the measurement channel, press the icon to measure a sample and record the
result.
3.7 Press the icon to browse the result(s).
Spectrum
Spectrum mode is used to scan the absorbance or transmissivity of the sample in a wavelength range.
1. Main interface, press the icon to start a Spectrum application.