Wacker Neuson BS 60-4 Repair Manual

Oil Injection (if equipped) Rammer Repair
126 wc_tx001549gb.fm
Installation
Perform the procedure below to install the oil pump.
7.5.1 Slide the cartridge assembly (g) into the crankcase.
7.5.2 Install the pump to the machine using three screws
(b). Torque the
screws to 17 Nm (12 ft.lbs.).
7.5.3 Reconnect the output hose (a).
7.5.4 Reinstall the engine.
7.5.5 Reinstall the carburetor.
Result
The replacement procedure is now complete.

Wacker Neuson BS 60-4 Specifications

General

Engine Manufacturer	Honda
Displacement	163 cm³
Operating Weight	66 kg
Percussion Rate	700 blows/min
Engine	Honda GX 160
Stroke	60 mm
Engine Type	4-stroke
Fuel Tank Capacity	3.0 liters