Petrol Dash Assembly Part Numbers & Descriptions
DINGO K94 - SERIES I, II, III Revision 1.3 September 2020
Page 47
Item Qty Part No. Description Notes
1 1
9001194009
WELDED DASH ASSEMBLY
2 1
9001194067
BONNET CATCH
3 1
9410000048
HOUR METER
1
9516000078
FUEL GAUGE AND HOUR METER COMBO
4 1
9001194043
HANDLE BAR – LEFT HAND
5 1
9001194044
HANDLE BAR – RIGHT HAND
6 2
9043000043
GRIP – HANDLE BAR
7 1
9511000012
THROTTLE CABLE ASSEMBLY 1 PIECE
1
9043100001
THROTTLE/CHOKE LEVER ONLY
1
9043100002
THROTTLE/CHOKE CABLE ONLY
8 4
9132151000
SPRING LOCK WASHER M12
9 4
9111511025
BOLT HEX M12 x 25mm
10 4
9111211020
HEX BOLT M6 x 20mm
11 2
9122121000
NYLOC NUT M6
12 1 9021000024 COMPLIANCE PLATE
13 4
9100000027
TYPE U DRIVE SCREWS 6 x 1/4” ZP
14 1 9001194355 PRECLEANER ASSEMBLY
15 1
9111311060
HEX BOLT M8 x 60mm
16 1
9122131000
NYLOC NUT M8
17 1 9410000119 FUSE BLOCK - 4 BLADE WITH COVER (EARLY)
17 1
9410000154
FUSE BLOCK - 4 BLADE WITH BUZZ BAR (LATE)
18 1 SEE NOTES FUSE BLOCK TOP NOT SOLD SEPERATELY
19 1
9410000120
15 AMP FUSE
20 2 9100000061 M6 BUTTON HEAD SCREW
21 2
9131121001
PLAIN WASHER M6
22 2
9132211000
SPRING LOCK WASHER M6
23 1
9410000059
40 AMP 5 PIN FAN RELAY
* SEE NOTES KOHLER IGNITION SWITCH OBSOLETE – REFER ** BELOW
* 1
9001194677
WIRE HARNESS WITH UPDATED IGNITION
1
9518000081
SWITCH IGNITION SUITS UPDATED HARNESS ONLY
1
9511000149
KEY – SWITCH IGNITION SUITS UPDATED HARNESS ONLY
** WHEN REPLACING THE ORIGINAL KOHLER IGNITION SWITCH – THE SWITCH AND
HARNESS WILL NEED TO BE REPLACED WITH AN UPDATED HARNESS ASSY :
9001194677.
To Next Page
Loading...
