T00884GB
15
MAINTENANCE
Maintenance schedule
Check all external screw connections for a tight fit appox. 8 hours after first operation.
Component Maintenance work Maintenance interval
Air filter Check cyclone and oil bath air filter - change daily
oil and clean cyclone if necessary.
Drive engine Check oil level, if nec. top up oil.
Drive engine First oil change. 25 hours
Centre pole height Regrease. weekly
setting, transport
lock
Protective frame, Check attachment screws for tight fit. monthly
central lifting point
Hydraulics Check oil level, top up if necessary.
Exciter Oil change. every 250 h,
or latest every
6 months
Drive engine Oil change, change oil filter. every 250 h
Keep cooling fins free of dirt, clean dry.
Retighten all accessible screw connections.
Battery Check acid level, if nec. top up with distilled water.
Valve clearance Check, set to 0,1 mm when engine is cold.
Hydraulic system First oil change. 500 hours
Fuel filter Change filter. every 500 h
Hydraulic fluid filter
Hydraulic system Oil change. every 1000 h
To Next Page
Loading...
Need help?
General
