Description
T01042GB 15
4.6 Charging the battery
There are two ways to charge the battery:
1. Spiral cable
Through the spiral cable (in the machine console) with the option of
operating the machine at the same time. Charging time maximum
40 minutes.
Green LED (k) on the sender will extinguish when the battery is
recharged.
2. External charging device
Plug the external charging device into a 230-V socket – green LED
(t) illuminates if there is voltage. Insert and lock the battery (s).
Yellow LED (u) illuminates: Battery charges.
Yellow LED (u) blinks: Battery is charged.
To avoid downtime, we recommend keeping a replacement battery
ready in the charging station so that you can replace the operational
battery when it is empty.
u
t
s
To Next Page
Loading...
