Transport to work site /Recom-
T01043GB 17
5. Transport to work site /Recommendations on compaction
5.1 Transport to work site
Conditions:
∗ To transport the vibration plate, only use suitable lifting equipment with
a minimum load-bearing capacity of 700 kg.
∗ Always switch off engine before transporting the machine!
∗ Only attach suitable tackle at the central lifting point (13) provided.
∗ During transport on the loading area of a vehicle, tie down the vibraion
plate using the lugs (14).
Hote: Also overve the regulations in “safety instructions“.
To Next Page
Loading...
