Wacker Neuson DPU 7060SC - 6.4 Steering the Machine

Operation
T01044GB 22
6.4 Steering the machine
The operator determines the machine’s direction of travel by moving
the two joysticks (g) on the sender. The vibratory plate will compact the
ground while moving forward, moving in reverse, spinning to the left,
spinning to the right, or simply standing still.
Advance
Push both joysticks
forward
Reverse
Pull both joysticks
to the rear
Left turn
Pull the left joystick
to the rear, push the
ri ight joystick
forward
Right turn
Push the left joystick
forward, pull the
right joystick to
the rear
Standing Still
The machine motor idles while both joysticks are in the
center position simultaneously for more than one second.