Labels E 2200 / E 3000ES
26 wc_si000541gb.fm
1053 CAUTION!
Hot surface hazard!
1054 WARNING!
Hand entanglement hazard!
Moving parts can crush and cut. Do not
operate with guard removed.
1055 HTF MSDS label.
This label is the Material Safety Data Sheet
for the HTF installed in the factory.
1056 —
xx A nameplate listing the model number, item
number, revision number, and serial number
is attached to each unit. Please record the
information found on this plate so it will be
available should the nameplate become lost
or damaged. When ordering parts or
requesting service information, you will
always be asked to specify the model
number, item number, revision number, and
serial number of the unit.
To Next Page
Loading...
Need help?
General
