Wacker Neuson E 2200 User Manual

E 2200 / E 3000ES Operation
wc_tx001667gb.fm 51
4.18 Stopping the Machine Temporarily
Precautions NOTICE: This procedure is to be used for stopping the machine temporarily for
routine maintenance such as refueling or repositioning hoses. Do not use this pro-
cedure for any other purpose.
Stopping the
machine
Follow the procedure below to stop the machine temporarily.
1. Move the burner ON-OFF switch (a) to the OFF position.
2. Allow the burner to complete the burner-motor-off delay period.
3. Move the pump ON-OFF switches (b and c) to the OFF position.
4. Turn off all accessories if applicable.
Your machine is now stopped.
Perform the necessary task(s) (refueling, repositioning hoses, etc.).
Restarting the
machine
Follow the procedure below to restart the machine.
1. Move the burner ON-OFF switch (a) to the ON position.
2. Wait until the burner fires.
3. Move the pump ON-OFF switches (b and c) to the ON position.
4. Start accessories if applicable.
Result Your machine has resumed operating.
wc_gr008084
b
c a

Wacker Neuson E 2200 Specifications

General

Brand	Wacker Neuson
Model	E 2200
Category	Heater
Language	English