wc_tx003099gb.fm
41
LTN 6L-V Maintenance
5 Maintenance
5.1 Preparing for Maintenance
Do not perform even routine service (oil/filter changes, cleaning, etc.) unless all
electrical components are shut down. Use the checklist below to prepare this
machine for maintenance.
Move the start switch to “OFF”.
Open the circuit breakers (move to the “OFF” position).
Close the emergency stop switch (push in).
Disconnect the negative terminal on the battery.
Attach a “DO NOT START” sign to the control panel.
If the unit is connected to a remote start or transfer switch, make sure the
remote switch is also off and tagged.
WARNING
A poorly maintained machine can malfunction, causing injuries or permanent
damage to the machine.
f Keep the machine in safe operating condition by performing periodic mainte-
nance and making repairs as needed.
To Next Page
Loading...