wc_tx003099gb.fm
45
LTN 6L-V Maintenance
5.6 Flushing the Radiator
When
Every 1000 hours or 2 years
Requirements
Engine is stopped and cool to the touch
Plastic sheet
Container of suitable size to collect drained coolant
Fresh 50/50 coolant/water solution
Procedure
Perform the procedure below to flush the radiator.
NOTICE: Do not add fluid to the over-flow reservoir.
1. Open one of the cabinet doors.
2. Slowly rotate the radiator cap (a) counterclockwise to release any remaining
system pressure. Unscrew and remove the radiator cap after the pressure has
been released.
3. Place a plastic sheet and container under the radiator.
This procedure continues on the next page.
WARNING
Burn hazard. Engine coolant is hot and under pressure at operating temperature.
f Stop the engine and let it cool before flushing the radiator.
wc_gr009363
a
To Next Page
Loading...
