Technical Data LTN 6L-V
70 wc_td000529gb.fm
8.4 Radiation Compliance
This machine meets the radio interference radiated emission
requirements of European Standard EN 13309 for Construction
Machinery.
The lamps provided with this machine are electric discharge lamps.
They are designed for use with metal halide ballasts only, and require
time to reach full brightness on initial startup and after a power
interruption. These lamps comply with FDA regulation performance
standards 21 CFR 1040-30.
Amperage A 26.1
Frequency Hz 50
Power factor # 1
Lamp type Metal halide
Lamp output W 1000
NEMA beam spread type 6
Maximum lighting coverage @
0.5 ft-candles
m
2
(ft
2
) 1204 (12,960)
Sound power level at operator's
location (L
pA
)
dB(A) 90
Guaranteed sound power level
(L
WA
)
dB(A) 91
Hydraulic fluid type SAE 10W30
Hydraulic fluid capacity L (gal) 2.13 (2.25)
AC outlet receptacles V, A
type
230, 16
Schuko
Convenience outlet receptacle V —
Model Unit
LTN 6L-V
LTN 6L-VS
LTN 6L-VS (Custom)
To Next Page
Loading...