RD 7 Operation
wc_tx000294gb.fm 27
4.5 Before Starting
Before starting the machine, check the following:
• Engine oil level
• Air cleaner maintenance indicator
• Fuel level
• Hydraulic fluid level
• Water tank level
4.6 Engine Throttle Control
See Graphic: wc_gr001338
The engine throttle control (c) is pulled out to start the engine. Press
in on the rubber button (c1) with your thumb while pulling the control
out. The control will stay at any position, and can be fine-tuned by
twisting the control in or out.
To stop the engine, push the throttle control all the way in by pressing
on the rubber button with the heel of your hand.
c
c1
a
b
d
wc_gr001338
To Next Page
Loading...
