Maintenance RD 7
56 wc_tx000295gb.fm
5.16 Pressure Washing the Machine
When pressure washing the machine, avoid using harsh chemicals
and only use moderate water pressure (35–70 MPa [500–1000 psi]) .
Avoid direct pressure to the following components:
• Engine
• Hydraulic
• Water tank/Plastic parts
• Hoses
• Labels
5.17 Storing the Machine
If the machine is to be stored for more than 30 days:
• Drain the fuel tank and the water tank.
• Open the water valve and drain water from the sprinkling system.
• Change the oil.
• Clean the entire roller and engine compartment.
• Remove dirt from the engine cooling fins.
• Cover the roller and place it in a dry, protected area.
• Remove the diesel injectors and put a little oil into the engine cyl-
inders.
• Remove the battery from the machine and charge it periodically
(RD 7H-ES).
To Next Page
Loading...
