TROUBLESHOOTING
Page 50
INDEX
CONTENTS
Double-clicking is difficult. Be sure you are quickly tapping the tablet twice in the same place on the
tablet’s active area.
Using the side switch to double-click is recommended (review the
techniques in Clic
king). See also Customizing the Side Switch.
Try increasing the DOUBLE-CLICK DISTANCE (see Adjusting Double-Click).
Try using a lighter TIP FEEL (see Adjusting Tip and Eraser Feel).
Try setting your system to launch programs with a single click.
See Adjusting Doub
le-Click.
The pen selects everything, will not
stop drawing.
Open the Pen Tablet control panel. Move the T
IP FEEL slider toward FIRM.
The eraser selects everything or
will not stop erasing.
Open the Pen Tablet control panel. Move the ERASER FEEL slider toward
F
IRM.
You notice a screen delay at the
beginning of pen strokes.
In the Pen Tablet control panel, try decreasing the D
OUBLE-CLICK DISTANCE
(see Adjusting Doub
le-Click).
You have to press hard with the pen
when clicking or drawing.
Open the Pen Tablet control panel. Move the T
IP FEEL slider toward SOFT.
The pen tip does not function. Make sure the status LED changes from orange to green when the pen tip
is pressed to the tablet surface. If it does not, you may have defective
hardware (see T
esting Your Tablet).
To Next Page
Loading...
Need help?
General
