52
IndexContents
52
52
IndexContents
52
Contents
Index
Contents
Index
TESTING THE TABLET CONTROLS AND TOOLS
If your Intuos tools or tablet controls do not work as you expect, it is a good idea to first check the assigned
functions or reset them to their default conditions. You will also want to do this if you have a touch-sensitive
tablet model and encounter problems with touch.
• Open the Wacom Tablet control panel and click on the A
BOUT button. In the dialog box that appears,
click D
IAGNOSE.... The DIAGNOSTICS dialog box shows dynamic information about the tablet, your tool(s),
and appropriate information for touch-sensitive tablets.
• If more than one tablet is connected to your system, in the T
ABLET INFO column select the unit for which
you are testing.
• Use the information shown in the D
IAGNOSTICS dialog box when testing your tablet and tools.
Note: If a tool button is set to R
ADIAL MENU or OPEN/RUN..., that function will occur when the button is
pressed. In this case you may want to change the button function before testing.
Testing the ExpressKeys
Testing a pen
To Next Page
Loading...
Need help?
General
