WAGNER T090 - Earthing

19
T090, T092.
OPERATING MANUAL
EDITION 01 /2014 PART NO. ZZB022ENG
5.1.2 EARTHING
7!2.).'
$ISCHARGE OF ELECTROSTATICALLY CHARGED COMPONENTS IN ATMO
SPHERESCONTAININGSOLVENTS
%XPLOSIONHAZARDFROMELECTROSTATICSPARKS
 #LEANTHEPISTONPUMPONLYWITHADAMPCLOTH
3)()??'"

7!2.).'
(EAVYPAINTMISTIFEARTHINGISINSUFlCIENT
2ISKOFPOISONING
)NSUFlCIENTPAINTAPPLICATIONQUALITY
 %ARTHALLUNITCOMPONENTS
 %ARTHTHEWORKPIECESBEINGPAINTED
3)()??'"
The regulator base shall be put to earth by means of the contact with the supporting
brackets, frames or  uid manifolds.
Make sure to avoid electrostatic charges on connecting pipes, using pipes in conductive
material where necessary. The earthing connection can be carried out also by means of
conductive pipes.
NOTE : After any repairing, cleaning or maintenance intervention, make sure to restore/
check the e ciency of the equipment earthing, before starting it up again.