WAGNER T090 - Use in an Explosion Hazard Area; Correct Use; Explosion Protection Identification; Max. Surface Temperature

9
T090, T092.
OPERATING MANUAL
EDITION 01 /2014 PART NO. ZZB022ENG
2.4.1 CORRECT USE
2.4.2 EXPLOSION PROTECTION IDENTIFICATION
2.4.3 MAX. SURFACE TEMPERATURE
2.4.4 SAFETY REGULATIONS
2.4 USE IN AN EXPLOSION HAZARD AREA
4HEUNITISSUITABLEFORWORKINGLIQUIDMATERIALSINACCORDANCEWITHTHECLASSIlCATIONINTO
EXPLOSIONCLASSES
As defined in the Directive 94/9/CE (ATEX 95), the unit is suitable for use in areas where
there is an explosion hazard.
II 2G IIB T5
CE: Communautés Européennes
Ex: Symbol for explosion protection
II: Unit class II
2: Category 2 (Zone 1)
G: Ex-atmosphere gas
IIB: Explosion class
T5: Temperature class: maximum surface temperature < 100°C; 212°F.
Max. surface temperature: same as the permissible material temperature
Permissible ambient temperature: see under Technical data, Section 4.3.2
-ECHANICALSPARKSCANFORMIFTHEUNITCOMESINTOCONTACTWITHMETAL
)NANEXPLOSIVEATMOSPHERE
 $ONOTKNOCKORPUSHTHEUNITAGAINSTSTEELORRUSTYIRON
 $ONOTDROPTHEUNIT
 5SEONLYTOOLSTHATAREMADEOFAPERMITTEDMATERIAL
)GNITIONTEMPERATUREOFTHECOATINGMATERIAL
 %NSURETHATTHEIGNITIONTEMPERATUREOFTHECOATING MATERIALISABOVETHEMAXIMUM
SURFACETEMPERATURE
-EDIUMSUPPORTINGATOMIZING
 4OATOMIZETHEMATERIALUSEONLYWEAKLYOXIDIZINGGASESEGAIR
J Check the equipment periodically.
Repair or replace worn or damaged parts immediately.
J Do not exceed the maximum allowed pressure. Refer to technical data section.
J Use the equipment only with fluids and solvents that are chemically compatible
with the equipment‘s wetted parts.