WAGNER W 690 Flexio - Coating Materials Suitable for Use; Description; Scope of Delivery; Field of Application

GB
24
W 690 Flexio
4. Description/ Scope of delivery
Description/ Scope of delivery (Fig. 1)
1) Air cap 2) Nozzle
3) Union nut 4) Standard spray attachment
5) Trigger 6) Material volume regulation
7) Gun handle 8) ON/OFF switch
9) Carry handle 10) Air volume control
11) Air hose 12) Power cable
13) Cover of air lter compartment 14) Air lter
15) Gun holder 16) Container (800 ml)
17) Valve 18) Ventilating hose
19) Carrying belt 20) Wall Extra I-Spray spray attachment
21) Stirring rod 22) Feed hopper (2 pcs.)
23) Replacement nozzle seal (3 pcs.)* 24) Practice poster
25) Operatimg instructions 26) Lubricating grease (without illustration)*
* This is inside the container: remove it before starting operations!
5. Field of application
Many dierent coating substances can be processed with the W 690.
A dierent spray attachment must be used, depending on the coating substance:
Coating Materials Spray attachment
Low-viscosity coating substances:
Water- and solvent-based paints, nishes,
primers, 2-component paints, clear
nishes, automotive nishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo
Standard
Interior wall paint (dispersions and latex
paint)
All coating materials with the green
Perfect Spray logo
Wall Extra I-spray
6. Coating Materials Suitable for Use
Interior wall paint (dispersions and latex paint)
Water- and solvent-based paints, nishes, primers, 2-component paints, clear nishes,
automotive nishes, staining sealers and wood sealer-preservatives.