Need help?Do you have a question about the WAGO 852 Series and is the answer not in the manual?
General| Model | 852 Series |
|---|---|
| Category | Switch |
| Ports | 8, 16 |
| Data Rate | 10/100 Mbps |
| Power Supply | 24 VDC (typically) |
| Mounting Type | DIN rail |
| Switch Type | Managed |
Provides critical safety warnings regarding energized devices, installation locations, and proper connection.
Guidelines for using ETHERNET devices on local networks, including firewall recommendations and access control.
Details the physical connections for grounding and power supply.
Describes the 3-pole male connector for power supply and its pin assignment.
Explains the use of copper connectors for ETHERNET and the 10/100BASE-TX ports.
Details the 10/100BASE-TX ports, their speeds, duplex modes, and auto-negotiation capabilities.
Presents detailed technical specifications for the device.
Lists physical dimensions, weight, mounting options, and degree of protection.
Specifies the supply voltage range and maximum power consumption.
Outlines communication ports, supported standards, and network topology.
Provides operating and storage temperature, humidity, vibration, shock, and EMC resistance specifications.
Guides on connecting the direct-current power supply (18-30V) and grounding the switch.
To Next Page
