Other Functions – Updating the System Software
155 Waldorf Q User’s Manual
7. Wait until the operation is completed. If updating was successful, the Q will perform a
system reset and start up.
If something goes wrong with updating, the Q displays an error message, e.g.:
Checksum Error
If this happens, try updating again. In some cases it can be necessary to adjust the sequencer tempo
before playing the file so that the data events are sent more slowly.
If this message appears:
Timeout
the file wasn’t transmitted completely to the Q or played back too slowly. Try to download the file
from the Internet again.
New functions in future OS will be documented in PDF files which are available at our ftp-
server (ftp://ftp.waldorf-gmbh.de/pub/waldorf/q).
Erasing internal data flash memory
Holding the Multi button during power-up erases all data flash memory. All programs will be set to
initial settings.
We recommended to use this function before dumping a complete new sound set into your Q.
몇 Attention – By using this function you will lose all your stored programs. Please be sure
backup your programs before.
To Next Page
Loading...
Need help?
General