Multi Mode – Instrument settings
Waldorf Q User’s Manual 46
All of the Multimode parameters can be changed in VU Mode. In addition to the Level Mode
parameters, the following parameters are also available:
• PAN sets the panorama position infinitely variable from 0 to 127
• ENG sets the Engine parameter as described above (PLY/MUT/SOL)
The Multi Mixer offers the possibility to mute or unmute instruments during a live performance.
Multi Tempo 40…300
[Multi Tempo 120]
Multi Tempo sets the global tempo for all instruments in the selected Multi program. It affects all step
sequencers, all arpeggiators and all LFO that are set to clocked. Please read the chapter “The Tempo”
on page 56 for further information.
The Multi Tempo parameter is controlled by the Tempo dial on the front panel, so it doesn’t
need to have an entry in the Multi parameter pages.
To Next Page
Loading...
Need help?
General