To Next Page

To Previous Page

Safety Instructions

SAFETY, CONTROL, AND INSTRUCTION DECALS

Safety, Control, and Instruction Decals are installed on the machine;

if any are missing, illegible, or damaged, a replacement should be ordered and installed before

putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.

Location: Deck Carrier Frame

Part Number: 8600-14

8600-14

1. Warning – do not operate the machine with the

deck tilted up.

1. Warning – thrown object hazard.

● Keep bystanders away from the machine

when operating.

● Clear lawn of debris before operating.

● Keep any discharge deector in place and in

the lowest position.

2. Warning – rotating mower blades are a cutting/

dismemberment hazard to hands and feet.

● Keep all body parts away from rotating mow-

er blades.

● Do not step on end of deck.

Location: Deck Carrier Frame

Part Number: 8600-15

1. Warning – lock deck tilt-up hinge before operat-

ing the machine.

Location: Deck Discharge Shield

(SD Decks Only)

Part Number: 5848-3

1. Warning – thrown object hazard.

● Always keep the discharge shield in the low-

est position when operating.

● Do not remove the discharge shield.

Location: Each End of Mower Deck

Part Number: 8600-28

8600-28

Location: Gear Axle

Part Number: 5810-1

Location: Deck Gearbox Cover

Part Number: 8600-39

1. Warning - stop engine and remove ignition key

before adjusting deck cutting height.

Walker D21d User Manual

Questions and Answers: