EasyManua.ls Logo

Walker H38i - Maintenance Instructions; Maintenance Schedule Chart

Walker H38i
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance Instructions
44
MAINTENANCE SCHEDULE CHART - RECOMMENDED SERVICE INTERVALS - MODEL H38i
Service Item
Daily
25
Hours
100
Hours
200
Hours
400
Hours
Yearly
Every
2 Years
Ref.
Page
Check Engine Crankcase Oil Level x 46
Check/Clean Engine Air Cooling System* x 54
Clean Grass Buildup Under Deck x 55
Service Mower Blades x 59
Check Security of Air Cleaner System x 58
Check Function of Warning Lights and Horn x 26
Lubricate Grease Fittings and Oil Points* x 49
Check Tire Pressure x 59
Check Drive Belts
(Engine/PTO, Ground Drive, Blade Drive)
x 60
Check Operation of Safety Interlock Switches x 61
Check Battery Electrolyte Level x 58
Check Transaxle Oil Level (in Reservoir) x 48
Change Engine Crankcase Oil**
Δ
x 46
Check Air Filter Element*** x 53
Clean Engine Cooling Fins x 55
Check Security of Drive Tire
Mounting Nuts (75 to 85 lb·ft)
x 59
Check Blade Brake Action x 61
Check FSC Friction Lock x 61
Check/Adjust Blade Clutch x 74
Clean Transaxle Housing x 57
Change Engine Oil Filter x 46
Check/Regap Spark Plugs x 60
Replace Fuel Filter x 67
Change Transaxle Oil and Filter
ΔΔ
x 48
Check Fuel Lines and Clamps x 60
Replace Air Filter Element *** x 53
Service Battery x 58
Service Solenoid Shift Starter x
ΔΔΔ
Check PTO UJoints for Wear/Looseness x 60
Replace Fuel Lines and Clamps x 60
Replace Ignition Wires x 60
* More often in extremely dusty or dirty conditions (Refer to notes about air cleaner element in
IMPORTANT TIPS FOR CARE OF THE KOHLER ENGINE)
** Change engine oil and lter after rst 5 hours of operation of a new engine (break-in period)
*** Air cleaner is engine mounted Kohler unit, replace lters every year or when worn or damaged
Δ Change oil every 50 hours when operating in dry, dirty conditions
ΔΔ Change transaxle oil after the initial break-in period of 75-100 hours operation
ΔΔΔ See your Walker dealer for this service or refer to the Walker Service Manual
CAUTION
Maintenance procedures requiring special training or
tools should be performed by a trained technician.

Table of Contents

Related product manuals