17=LET
Quick Start Guide
•
Remote Controller Operation
Switch
Remote Controller
setting
instructions
GEAR
Model Menu
®
Please turn the video/photo switch to " II " position.
4
Device Output
0
Start video:
turn the
from "0" position to "1" position,
wait for 1-2 seconds, then return to the "0" position, the camera will
start recording
(the red indicator keeps flashing with an interval
of 0.5 second).
Aux2
4
Stop recording:
turn the
GEAR switch
from "0" position to "1" position,
wait for 1-2 seconds, then return to the "0" position, the camera will
GEAR SW
stop recording
(the red indicator keeps solid red).
4
Note:
You must stop recording to store the video on the SD card.
Active
The video will not be stored if you turn off the power without stopping
the recording.
11.3 Photo instruction
•
Manual Operation
Turn the video/photo switch to
CI,
press the shutter button once, camera will take a photo (the red indicator
light out once then keeps solid red), press the shutter button again, it will take another photo.
•
Remote Controller Operation
Switch
Remote Controller
setting
instructions
GEAR
Model Menu
0
Please turn the video/photo switch to "
CI
"
position.
4
Device Output
-- —
© Turn the
on the Remote Controller from "0" position
AUX
4
2
4
to "1" position, wait for 1-2 seconds, then return to the "0" position,
the camera will start to take a photo (the red indicator light out once
GEAR SW
then keeps solid red), operate again to take another photo, and so on.
4
Active
-21-
To Next Page
Loading...
