Walter Surfox 203 - E) Marking Wand Supplies and Part Numbers

5- Remove the stencil.
TIP!
For best results, always tape the stencil in place using masking tape before marking.
6- Neutralize the work piece with Surfox-N.
7- Neutralize the stencil with Surfox-N, rince well with water and dry. Store the stencil between 2 sheets of
cardboard and keep in a dry place.
E) MARKING WAND SUPPLIES AND PART NUMBERS
Marking kit part no.: 54-B 013
18
The kit includes:
1 Marking Wand with 2 O-rings 54-B 061
10 Mark
ing pads
54-B 062 10 per package
1
Surfox-M 350ml 54-B 053
1 black power cord 54-B 063
1 solution container 54-B 065
5 temporary stencils 54-B 064 100 per package
1 sample custom stencil
VIII
-
VIII- VIII
USING THE MARKING WAN
D (OPTIONAL)
USING THE MARKING WAND (OPTIONAL)USING THE MARKING WAN