Walther Systemtechnik S11 series - Spray Images; Types of Defects; Type of Defect

Rev. 1.4
Assembly Instructions – Spray Valve SMS-11
Page 16 of 28
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
7.10 Spray Images / Types of Defects
SPRAY IMAGE
PROBLEM
CAUSE
ACTION
Normal Spray Image (Flat jet)
Normal Spray Image (Round jet)
Spray image shaped
too much
upwards and
downwards
Spray image shaped
too much
upwards and
downwards
Spray image shaped
too much
upwards and
downwards
Spray image too much
left-sided or right-sided
Spray image too much
left-sided or right-sided
Spray image too much
left-sided or right-sided
Heavy application in the
middle of the spray image
Heavy application in the
middle of the spray
image
Heavy application in the
middle of the spray
image
Split
spray image
Split
spray image
Split
spray image