EasyManua.ls Logo

Washtech PW2 - Safety Instructions; Safety During Installation; Safety During Training and Supervision; Hot Surface Safety

Washtech PW2
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Instructions
WARNING
Equipment contains dangerous voltages and can be hazardous if installed or
operated incorrectly. Non-compliance with Warnings or failure to follow the
instructions contained in this manual can result in loss of life, severe personal
injury or serious damage to property.
Installation
♦ Use qualified, skilled personnel
♦ Follow installation instructions
♦ Connect to correct voltage and supply current
♦ Provide fully accessible Electrical Isolation Switch
Training and Supervision
♦ Read and Understand the Operating instructions
♦ Train all staff
♦ This appliance is not intended for use by young children, who must be
supervised to ensure they do not play with the appliance
♦ This appliance is not intended for use by infirm persons without supervision
♦ This appliance is not intended for use as a stepladder
Hot Surfaces
♦ Be aware some surfaces can be hot
Chemicals
♦ Commercial dishwashing detergents are hazardous
♦ Read and follow the safety information found on the labels of detergent
containers and Material Safety Data Sheets
♦ Handle with care
♦ Use protective eyewear and clothing if decanting containers
Hot Water
♦ Door safety switches are designed for emergency use only
♦ Wait for the green cycle light to go out before opening the door
♦ Wash water is 60°C and contains caustic detergent so DO NOT put hands
in wash water
Cleaning
♦ DO NOT hose down the machine or splash water over the exterior
♦ Watch for broken glass etc when cleaning the inside of the machine
Service Manual PW2(W)
4
Revision 1B