Watlow ez-zone pm - Page 53

Watlow EZ-ZONE
®
PM Integrated Controller • 50 • Chapter 5 Operations Page
Operations Page
Display
Parameter name
Description
Range Default
Parameter
Appears in
Menu When
Modbus Rela-
tive Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Data
Type
&
Read/
Write
No Dis-
play
Math (1)
Math Output Error
View reported cause
for math malfunction.
None (61)
Open (65)
Shorted (127)
Measurement error
(140)
Bad calibration data
(139)
Ambient error (9)
RTD error (14)
Fail (32)
Math error (1423)
Not sourced (246)
Stale (1617)
Can't process (1659)
- - - - - - - - Instance 1
Map 1 Map 2
- - - - 3056
0x7D (125)
1
0x1D (29)
- - - - uint
R
[`SoF]*
[oPEr]
Special Output
Function Menu
[`Su;A]
[ Sv.A]
Special Output Func-
tion (1)
Source Value 1
View the value of
Source A which is
connected to Loop
Power 1.
-1,999.000 to
9,999.000°Forunits
-1,128.000 to
5,537.000°C
- - - - Always if
digit 12 of
part num-
ber is "C".
Instance 1
Map 1 Map 2
- - - - 3852
0x87 (135)
1
7
- - - - float
R
[`Su;b]
[ Su.b]
Special Output Func-
tion (1)
Source Value 2
View the value of
Source B which is
connected to Loop
Power 2.
-1,999.000 to
9,999.000°Forunits
-1,128.000 to
5,537.000°C
- - - - Special Out-
put Func-
tion is set to
Compressor.
Instance 1
Map 1 Map 2
- - - - 3854
0x87 (135)
1
8
- - - - float
R
[`o;u1]
[ o.v1]
Special Output Func-
tion (1)
Output Value 1
View the value of this
function's Output 1.
-1,999.000 to
9,999.000°Forunits
-1,128.000 to
5,537.000°C
- - - - Always Instance 1
Map 1 Map 2
- - - - 3858
0x87 (135)
1
0xA (10)
- - - - float
R
[`o;u2]
[ o.v2]
Special Output Func-
tion (1)
Output Value 2
View the value of this
function's Output 2.
-1,999.000 to
9,999.000°Forunits
-1,128.000 to
5,537.000°C
- - - - Special Out-
put Func-
tion (Setup
Page) is
set to Se-
quencer or
Motorized
Valve.
Instance 1
Map 1 Map 2
- - - - 3862
0x87 (135)
1
0xC (12)
- - - - float
R
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read with
other interfaces.
* Available with PM4, PM8 and PM9 models only
R: Read
W: Write
E: EE-
PROM
S: User
Set