Wavecom TnP-500X - Set Date; Time

Wavecom Instruments Fully Integrated Test N Print Unit - User Manual
29
 Set the number of digit for barcodes.
 Set the auto generate barcode number
 Use leading zeros for the auto generate number.
 Search all sites on barcode search (only available from TnP options menu).
Search All Sites Allows the TnP to search all sites listed in the site names section for the given barcode. If this option has not
been altered, then by default search all site is disabled. When disabled the TnP can only search for barcodes that are in the
site selected (Indicated by the site name in new barcode / search barcode screen).
Search all sites is useful disabled and enabled. For example, you may have many items with the same barcode number in
different sites. Disabling this feature allow you isolate a particular barcode with ease. If you have a barcode but you are unsure
which site it is in, then you should enable search all sites.
Be careful when search all sites is enabled. If a barcode is found in another site, the site name will change when you return
the new barcode screen.
Set Date / Time
Kill Switch
To stop operation, press the return/enter key at any time. The unit will power down after 20 seconds as factory
default
Caution: This test turns the Equipment ON. The power / leakage test can handle up to 10 Amp (Resistive) Load
MAX. Exceeding this value will blow the external M205 ceramic fuse. Care should be taken when testing inductive loads (i.e.
AC motors) with large start up currents.
If 10A HBC fuse is blown the appliance will not operate in Leakage test modes. Replace fuse only with M20 10A HBC fuses.
Any other fuse voids warranty and manufacturers design.
Caution: DO NOT OPEN TnP - Series case as there are no serviceable parts inside and you can void your Warranty
Other Features
Barcode Printing Function - Only on Selected Memory Models This utility will print out barcode labels from what is typed on
the screen. The idea is to save time by storing these barcodes in a book or collection. From here you can quickly scan a barcode
without having to retype the text back into the TnP unit. To access this feature:
 Hold the key from the new barcode / search barcode screen.
You will be required to select your printer model. The Wavecom printer has a different print orientation to the Wavecom
model. Selecting the wrong printer model will make the tag print incorrectly.
 Press the key if you have a Wavecom or plus model printer.
 Press the key if you have a Wavecom model printer.