Wavecom are a wholly owned and operated company who
manufacture top grade Electrical Test Equipment in Adelaide Australia.
To support our test and print units we offer to you our range of
electrical test tags that are made of the highest grade polypropylene and
polyester label materials. These materials are robust and resistant to tearing
and will cope with harsh Australian environments. It is
recommended in extreme external conditions you use UV resistant tags
The test tags/labels we offer come in the full range of colours, each tag comes
with a clear white area where a barcode can be printed into ensuring easy and
accurate scanning, this results in the user being able to conduct fast scanning
without issues.
All of the Wavecom tags are suitable for printing using every brand of thermal
transfer printers available from around the world. The
adhesive used on our tags is most aggressive and comes highly
recommended for use in the electrical test and tag industry, there should be
no butterflying once applied.
Order Information:
Standard Tag ן Part no: WCM-TAG-W (R,Bl,G,O,Y, Br)
UV Tag ןPart no: WCM-UV-TAG-W (R,Bl,G,O,Y, Br)
Colour: (W) White, (R) Red, (BL) Blue, (G) Green, (O) Orange, (Y) Yellow (BR) Burgundy
In support of the Wavecom Tags we offer two grades of ribbons which we have resourced that are very well
suited for “On the spot printing” of Electrical Testing tags. Our standard ribbon (WCM-Ribbon) is
recommended for locations where the printed tag is not exposed to harsh outdoor environment such as Factory,
Office etc...
Our UV Ribbon (WCM-UV-Ribbon) is recommended for harsher environments like Mines or where the
equipment is being tested is exposed to the elements etc... To ensure the durability of print on your tag it is
essential that the right ribbon is used on the appropriate label material.
In locations where a tag is exposed harsh chemicals or extreme heavy abrasive environments a printed tag
may need additional added protection to protect the integrity of the print. Wavecom have available clear film
overlays which can be applied over the top of an existing tag. These clear laminate overlays are made of strong
durable synthetic materials and come with an adhesive backing that ensures that when the overlay is stuck
done it stays stuck.
The added benefit to users of the Wavecom tag printing units is they can print the test tag as normal. Before
the tag is removed from the backing paper, or still attached to the printer, the clear laminate is placed over
the printed tag. The combination of tag and overlay is then removed from the backing paper and applied to
the appliance as per normal.
To Next Page
Loading...
