EasyManuals Logo

WAVECONTROL SMP User Manual

WAVECONTROL SMP
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
2 INTRODUCTION
The SMP Portable Electromagnetic Field Monitoring System can measure electromagnetic field
levels generated by any source within the frequency range of the probe attached to the system.
For example it can measure fields generated by different sources such as mobile telephone base
stations, radio and television transmitters and repeaters, DECT systems, Wi-Fi systems, etc.
Those measurements can be made quickly and easily anywhere because the SMP is portable and
simple to handle and use.
The SMP can sample the field level continuously and store that data automatically in its built-in
memory at user-configured intervals with a capacity of up to 62,000 samples.
The data stored in the memory can easily be downloaded to a computer via a USB port for later
processing.
The SMP is also available with a built-in GPS receiver to allow each measurement to be associated
automatically with the geographic location where it was taken.
- 4 -

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the WAVECONTROL SMP and is the answer not in the manual?

WAVECONTROL SMP Specifications

General IconGeneral
BrandWAVECONTROL
ModelSMP
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals